Installation; Connecting The Video/Rs-232 Extender Kit - Black Box CAT5 Video/RS-232 Manual De Instrucciones

CAT5 VIDEO/RS-232 EXTENDER KIT

3. Installation

3.1 Connecting the Video/RS-232 Extender Kit

Figure 3-1 illustrates the local and remote Video Data Transmitter (VDT)
connections. Connect a power supply to each unit. Once connected, the system is
ready to transmit VGA and RS-232 signals.
NOTE
You must use shielded Category 5 cable.
To screen port
Local Unit
To system port
To RS-232 port
Shielded CAT5
cable
To video card
To system port
To RS-232 port
Picture adjuster
Remote Unit
To VGA port
Figure 3-1. Typical application.
8