Alarm Input - Niko 450-00064 Manual Del Usuario

450-00064
2.3. Fabric settings
You can retrieve the fabric settings at any time. Therefore, connect the telephone interface
to the mains and simultaneously press both push buttons until the LEDs blink. The following
parameters are set as a standard. You can write down your proper settings on the dotted
line.

Alarm input 1

Alarm phone 1: no
Alarm phone 2: no
Alarm phone 3: no
Status: active
Alarm input 2
Alarm phone 1: no
Alarm phone 2: no
Alarm phone 3: no
Status: active
Proper number: no
Mode 'answering machine': off .....................................................................................
Number of ring tones: 2
Code: 0000
Number of call attempts: 12
Language: --
58
Proper setting
.....................................................................................
.....................................................................................
.....................................................................................
.....................................................................................
.....................................................................................
.....................................................................................
.....................................................................................
.....................................................................................
EN