Stiga T8615 Manual Del Usuario página 4

5. Lay out Right Side Rails #25, Left Side Rails #29 and End Rail #26,
around edges of table top a s shown in Figure 3.
6. Slide Left #35 and Right #34 Vinyl End Caps onto the ends of
the Side Rails #25 & 29 as shown in Detail C.
7. Line up holes in rails with indentations in top and
secure using eighteen screws #20. See Figure 3
& Detail C.
8. Lay Corner Caps #22 on table as shown in
Figure 3. If Corner Cap sticks above the
table top surface of the table, flip over so
the longer distance is against edge. Secure
to bottom of table with three Screws #21.
See Detail D.
35 (LH)
Detail C
Note: Stiga logo
on this end of rail.
20
29
(LH Rail)
20
Detail D
Figure 3 Figure 3
Figure 3
7
4
21
22
Note: Rails attach
with #20 screws
20
26
Note: Stiga logo
on this end of rail.
25
(RH Rail)
20
Note: Rails attach
with #20 screws
34
(RH)