Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
STRIKE 1 QRG
AC Power
Power Linking
AC Plug
DMX Linking
DMX Connection
Master/Slave
Connection
RDM
(Remote Device
Management)
This product has an auto-ranging power supply that can work with an input voltage
range of 100–240 VAC, 50/60 Hz.
You can link up to 6 STRIKE 1 products at 120 V, 10 products at 208 V, or
11 products at 230 V. Never exceed this number. Power linking cords can be
purchased separately.
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the product from power via breaker or by
unplugging it.
The STRIKE 1 will work with a DMX controller using a 5-pin DMX serial
connection. A DMX Primer is available from www.chauvetprofessional.com.
The STRIKE 1 uses a 5-pin DMX data connection for its DMX personalities:
2 Ch, 3 Ch, 4 Ch and 5 Ch. See the User Manual for information about
connecting and configuring the product for DMX operation.
The STRIKE 1 uses the DMX data connection for its Master/Slave mode. See the
User Manual for information about connect and configure the product for
master/slave operation.
Remote Device Management, or RDM, is a standard for allowing DMX-enabled
devices to communicate bi-directionally along existing DMX cabling. The
Strike 1 supports RDM protocol that allows feedback to monitor temperature and
changes to DMX Address and DMX Channel menu map options. Download the
User Manual from
www.chauvetprofessional.com
Wire (U.S.)
Wire (Europe)
Black
White
Green/Yellow
Green/Yellow
3
Screw Color
Brown
Yellow/Brass
Blue
Silver
Green
for more details.
EN
Publicidad
Tabla de contenido
