Adjusting Your Monitor
Brightness
Adjust the Brightness.
1. Push the Menu (
2. Push the Menu (
Brightness adjustment screen.
3. Use the + button to increase the brightness or - button
to decrease the brightness.
Direct Access Feature :
When OSD is not on the screen, Push the + or - button to
adjust brightness.
Contrast
Adjust the Contrast.
1. Push the Menu (
2. Push the - button or + button until the
Contrast screen is displayed.
3. Push the Menu (
Contrast adjustment screen.
4. Use the + button to increase the contrast or - button
to decrease the contrast.
18
) button.
) button to open the
) button.
) button to open the
Adjusting Your Monitor
Image Lock
Fine
Image Lock is used to fine tune and get the best image by
removing noises that creates unstable images with jitters
and shimmers. If satisfactory results are not obtained using
the Fine adjustment, use the Coarse adjustment and then
use Fine again.
1. Push the Menu (
2. Push the - button or + button until the Image Lock screen
is displayed.
3. Push the Menu (
Fine adjustment screen.
4. Use the - or + buttons to remove any noise.
Coarse
Image Lock is used to fine tune and get the best image by
removing noises that creates unstable images with jitters
and shimmers. If satisfactory results are not obtained using
the Fine adjustment, use the Coarse adjustment and then
use Fine again.
1. Push the Menu (
2. Push the - button or + button until the Image Lock screen
is displayed.
3. Push the Menu (
press the - or + button until the Coarse screen appears.
Push the Menu (
screen.
4. Use the - or + buttons to remove any noise.
19
) button.
) button twice to open the
) button.
) button again and then
) button to open the Coarse adjustment