Setting Up Your Monitor; Connecting Your Monitor - Samsung SyncMaster 152B Manual De Instrucciones

Setting up Your Monitor

Connecting Your Monitor

Rear of Computer
Rear of Monitor
1. Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
3. Connect the monitor to the Macintosh computer using the D-SUB connection cable.
4. In the case of an old model Macintosh, you need to connect the monitor
using a special Mac adaptor.
5. Turn on your computer and monitor. If your monitor displays an image, installation is complete.
4
New Model Macintosh
Old Model Macintosh
(Not included)
Adapter for Macintosh
Setting up Your Monitor
Connecting Your Monitor
Setup-For Multimedia model
1. PC sound connection terminal (Input)
2. Headphone connection terminal (Output)
3. Volume
4. To listen in privacy, connect headphones here.
5. Connect a sound cable from the input source (sound card, computer, CD-ROM drive).
5