Sonia Tyl H1103 Manual De Instrucciones página 2

DDUUEETT EUROPE would like to thank you
for choosing Sonia products. We hope that this
instruction manual will help you get the most out of
this product.
If you have any doubts regarding its use and/or
operation, please contact your distributor.
FOREWORD
● Please read the entire instruction manual carefully
before using the product. Take note of any warnings
included in this manual.
● Always keep this instruction manual handy and if
you give the device to another person, hand over
the manual as it is an essential part of the product.
● Some components of the product may differ from
the image that appears in catalogues, websites,
brochures, etc.
● In order to enhance the product, the manufacturer
reserves the right to modify its features and/or
components without prior notice.
CORRECT USE OF THE DEVICE
● This product has been designed to be used by
beauty professionals at beauty salons and should
not be used for other purposes.
● Please note that any misuse of the device entails
the loss of the guarantee.
● Do not make any modification to the device without
the authorisation of DDUUEETT EUROPE SL.
● DDUUEETT EUROPE SL shall not be held liable for
any material or personal damage due to the misuse
of the product.
PRECAUTIONS AND SAFETY
INDICATIONS
● Before using it for the first time and after each
use, check the device and the mains cable for any
damage.
● Unplug the device from the mains before starting to
clean it or undertaking any type of maintenance.
● Do not use the product outdoors or in places
where it may be affected by humidity or inclement
weather.
● If the power supply cable is defective, unplug the
appliance immediately and inform your dealer or
specialised technician.
● Position the power supply cable properly so that
people cannot trip over it and make sure you plug it
into an earthed socket.
● At the end of the working day, disconnect the
device and unplug the power supply cable from the
mains.
● If you detect any anomaly in the operation of
EN
2
the product, please contact your distributor or
specialised technician.
● The device and accessories should be kept out of
the reach of children.
● Only plug the device into a properly installed
socket. The local mains voltage must correspond to
the technical specifications of the device.
● The power socket must be accessible in case you
have to quickly unplug the device at any given time.
● Always pull out the actual plug and not the mains
cable.
● Never tamper with any electrical component or
open up/repair any component of the device.
● Only your distributor or specialised technician
should repair the device.
● Do not switch on the device if there is visible
damage to it or to the mains cable.
● Never touch the device or the mains cable with wet
hands.
● The use of distilled water is recommended to
extend the useful life of the steamer components.
● Before operating the facial steamer, make sure the
filler cap and the water tank have been properly
attached and tightened, and that the water level is
between the "MAX" and "MIN" level indicators.
● Check the safety distance between the mouthpiece
and the patient's face, as inadequate distance may
cause skin burns.
● Before adding essential oil, please ensure that the
steamer is in standby mode.
● Never add essential oils directly into the water
tank.
● Wait until the steam is produced steadily before
starting the treatment.
● The ozone function should be used according to
the professional's criteria depending on the type of
skin to be treated.
● If you need to remove the water tank, disconnect
the steamer from the mains and wait for the water
to cool down.
● If you notice a water leak, unplug the steamer from
the mains. Then check if the water tank is properly
positioned. If the problem persists, contact your
dealer.