Setting A Station Preset; Tuning In A Preset Station; Removing One Or More Presets; Alarm Clock Features - Boston Horizon Solo XT Manual De Instrucciones

Setting a Station Preset

1
Tune in the FM or DAB station you want to assign to a preset.
3
Press and hold the control for 3 seconds. The preset
TUNE
indicator in the upper left corner of the display will light
indicating the station has been stored in the preset.
In this example FM station 104.75 has been assigned to preset 1.

Tuning in a Preset Station

1
Turn the control to highlight "Preset" in the display.
MODE/INFO
2
Press the control. The last preset tuned in is
MODE/INFO
recalled.
3
Turn the control to select the station preset you want.
TUNE
4
Press the control to select the preset.
TUNE

Removing One or More Presets

To remove one preset, tune in the preset station as described above.
Press and hold the control until "Preset Cleared" fl ashes in the
TUNE
display.
If you want to clear all the presets so you can reprogram them, press and hold the
seconds until "Presets Empty" appears in the display.

Alarm Clock Features

The Solo XT has two independent alarm settings. Each can have its own type of alarm —wake to tone, wake
to music or both. Both types of alarms start at a low volume level that gently increases. In addition you can
set the alarms for every day, weekdays only or weekends only .

Alarm Setup

1
Press and hold the Alarm 1 or Alarm 2 button for one second to access
the "Alarm Setup" screen shown here.
2
Turn the control to highlight the item you want to adjust,
MODE/INFO
then press the control to select it. For example, if you highlight "Alarm
Time" and press the control you'll see the second display screen with the
Alarm Time highlight box fl ashing.
3
Turn either the
MODE/INFO
then press the control.
10
or control to adjust the Alarm Time,
TUNE
control for 10
TUNE