Basic Control Operations; Turning The Solo Xt On Or Off; Adjusting The Volume; Selecting Sources Or Setup Functions - Boston Horizon Solo XT Manual De Instrucciones

Basic Control Operations

Turning the Solo XT On or Off

Press the control on the center of the front
POWER/VOLUME
panel.

Adjusting the Volume

Turn the front panel
POWER/VOLUME
Note: On the control illustrations –
Regular arrows indicate to press and release
the button or control.
Double headed arrows indicate to press and hold
the button or control.

Selecting Sources or Setup Functions

Use the control to select the source you want to listen to or access the "DAB Setup" or "Setup
MODE/INFO
Options" menus.
1
Turn the control to display the "Mode"
MODE/INFO
menu. Highlight the source you want to hear or the
setup menu you want to use.
2
Press the control to select the highlighted
MODE/INFO
item.
Note: The "Setup Option" selection is not shown in the
initial display. Move the highlight box past the "DAB Setup"
selection to access "Setup Options" .

About the Setup Options Functions

When you select "Setup Options" from the "Mode" menu the "Setup Options" menu is displayed. Initially the
display shown below on the left appears. Turn the
the control until the highlight box moves past the "Display" menu item, more menu items appear,
MODE/INFO
as shown in the display on the right.
In this display the Alarm 1
function is highlighted for selection.
In the next section the procedure for setting the clock is described. Other Setup function are described in
later sections. Once you know how to set up one of the Mode functions the others will be easy.
6
knob.
control to move the highlight box. If you turn
MODE/INFO
In this display the Audio control
function is highlighted for selection.
This illustration shows the DAB radio
source highlighted for selection.