Maintenance And Cleaning; Maintenance; Changing The Dust Bag; Changing The Filter - Lervia KH 3158 Instrucciones De Utilización Y De Seguridad

Maintenance and Cleaning

A Maintenance and Cleaning
A

Maintenance

a Changing the Dust Bag (TYPE KH 99)
You can see that the dust bag
full when the filling level indicator
viewing window is 100 % RED.
• Turn the vacuum cleaner off and disconnect
the power cord from the mains.
A
• Press the release button
the dust collection container and open the
cover.
• Remove the full dust bag
bag holder by pressing the clamping
u
lever.
• Insert a new dust bag of TYPE KH 99 or type
Swirl Y 101 into the dust bag holder.
® ®
Note:
If no dust bag is inserted it is not possible to
close the cover!
a

Changing the Filter

• Switch the vacuum cleaner off and disconnect
the power cord from the mains.
A
• Press the release button
the dust collection container and open the
cover.
• Remove the full dust bag
bag container by pressing the clamping
u
lever.
Motor Protection Filter
The motor protection filter
compartment against dirt (see illustration B).
• Remove the motor protection filter
the holder.
26 GB/MT
is completely
i
in the
q
on the cover of
{
from the dust
i
on the cover of
{
from the dust
i
protects the motor
o
from
o
• Replace the filter insert by another one.
• Then reinsert the motor protection filter
the holder.
Exhaust Air Filter
The exhaust air filter
p
which would otherwise be given off to the
surrounding air. The exhaust air filter should be
changed after a visual check (see illustration F).
If a replacement is needed, this can be
purchased from our service addresses.
• Remove the exhaust air filter
from the holder.
• Replace the entire exhaust air filter
by a new one.
• Insert the new exhaust air filter
holder and allow it to click into place.
a

Thread Catcher

Through the use of the thread catchers on the
underside of the floor nozzle
fluff are vacuumed up particularly thoroughly.
Worn thread catchers can be levered out with an
appropriate tool. If a replacement is needed, this
can be bought from our service addresses.
A

Cleaning

• Switch the vacuum cleaner off and discon-
nect the power cord
• Please use a dry cloth for cleaning.
• The device should never be cleaned with
moisture!
• Use a brush or tweezers to remove threads
from the floor nozzle
from time to time with the crevice nozzle
in
o
collects fine dusts
p
into the
p
, threads and
I
from the mains.
A
, or vacuum these off
I
.
r