Cequent Performance Products 24935 Instrucciones De Instalación página 5

5. Gently pull away the sides of the bumper cover until it detaches from
vehicle. Disconnect the harness at the bumper, and put the bumper cover
aside.
7. Raise the hitch into position, sandwich the hitch between vehicle frame
and bumper, and loosely install the factory bolts.
©2015 Cequent™ Performance Products, Inc. - Printed in Mexico
6. Remove (4) bolts and (2) nuts with a 15mm socket and put the bumper
aside.
8. Tighten all 10mm fasteners to 42 lb-ft (57 N*M). Reinstall the bumper
cover, harness and taillights in reverse order.
Proper torque is needed to keep the hitch secure to the vehicle when
towing.
Sheet 5 of 15 24935NP 08-19-15 Rev. A