I.SOUND DuraWaves Guía De Usuario página 3

Charge DuraWaves with the included USB charge cable. Plug
one end into the rear of DuraWaves and the other end into a
powered USB port like on a computer
NOTE: A red LED indicator turns ON during charging and turns
OFF a er fully charged. For optimal ba ery maintenance,
please unplug the USB cable a er fully charged. A red LED
indicator also lights up when power is low (<21%). It is
accompanied by a charge indicating sound.
If you need a USB AC adapter or car charger, please visit
www.isound.com and search for item numbers: ISOUND-2102
or ISOUND-2104.
Playing music via Bluetooth® mode
1. Make sure that DuraWaves is charged.
2. Turn DuraWaves on by pressing the power bu on. An LED
will ash red and white, indicating pairing mode.
3. Follow the instructions for pairing that came with your
Bluetooth enabled device. You may have to go into your
se ings and turn Bluetooth ON. Make sure your device is
discoverable or in search mode.
4. Your device should discover "DuraWaves." Select this pro le.
If a password is required, type "0000."
NOTE: Once you are paired, the LED will illuminate solid white.
5. You are now connected and can play your audio
content wirelessly!
Using the speakerphone function
With the built-in microphone, DuraWaves can be used as a
speakerphone when you are connected via Bluetooth. When