Electrical Requirements; Installing The Power Cord - Kenmore 580.72089 Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OBSERVEALLLOCALCODESAND
ORDINANCES.
DO NOT_UNDER
ANY CIRCUMSTANCES_
REMOVETHEPOWERSUPPLYCORD
GROUND
PRONG.
ELECTRICAL
GROUND IS REQUIRED
ON
THIS APPLIANCE.
A 115-vott 60 Hz, AC only, 15A fused and
properly grounded electrical supply is required,
A time delay fuse or time delay circuit breaker
is recommended.
Use a dedicated circuit,
serving only this appliance.
DO NOT USE AN EXTENSION
CORD.
RECOMMENDED
GROUNDING
METHOD
For your personal safety, this appliance
must
be grounded° This appliance has a power
supply cord with a 3-prong grounding
plug° To
minimize possible shock hazard, the cord must
be plugged into a mating grounding type walt
receptacle
and grounded in accordance
with
the National Electrical Code (ANSI/NFPA
70)
latest edition and all local codes and
ordinances,
if a mating wall receptacle
is not
available,
it is the personal
responsibility
and
obligation
of the customer to have a properly
grounded
3-prong wall receptacle
instaifed by a
qualified
electrician°
_WARNING
Electrical
Shock Hazard
Plug into a grounded
3 prong outlet.
Do not remove ground prong.
Do not use an adapter,
Do not use an extension
cord_
Failure to follow these instructions
can result
in death, fire, or electrical shock.
3-prong
..._
grounding
_"
, _p
0,u0
N
Ground
Power
¢]
prong
supply
cord
J
grounding
type wall
receptacle
You can choose between two methods below according to your window stoot shape and preference.,
USING SLIT "A"
Fasten the stopper using 2 screw holes, and lead
out the power cord throughslit "A",
USING
SLIT
"B"
Fasten the stopper using left screw hole, and rotate
properly to lead the power cord out through slit "B"
Power
:i
:
!

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido