Amcrest WLD895 Manual Del Usuario página 11

3
.1
Camera Setup
The camera menu contains 5 sub-menus.
3
.1. Pairing:
1
If you have purchased addition cameras, use the pairing function
to add the cameras. You will also need to use the pairing button
located at the back of the camera.
1. Tap the camera number you want to pair at the screen. You will
see a small pairing animation underneath the camera selection.
2. Use a paperclip or pen to press the pair button at the back of
the camera. The red Power LED of the camera will start to flash.
3. After a short moment, the LED will stop flashing and you will see
an image from the camera on screen. The camera is now paired.
3
3
Camera Selection:
.1.
.2
2
The camera selection function is useful if you have multiple
cameras configured. If only one camera has been selected, the
live view screen will only display the Single view. If two
cameras have been selected, the live view screen can be
switched between Single view and Dual view. If three or four
cameras have been selected, the live view screen can be
switched between Single view and Quad view.
9