Amcrest WLD895 Manual Del Usuario página 22

2. Tap the
3. Hold your mobile device
close to the QR code to
scan. When the code is
successfully scanned, the
UID field will be populated
automatically.
4. Give the camera a new
name or leave it as
displayed. Enter the default
password "12345", and
then tap "Save" to finish the
device setup.
20
icon then tap "QR Code" to scan the
QR code located on the rear of the monitor. You can also
tap "Add" to manually input the UID instead of scanning
the QR code.
The UID and QR code label is
on the rear of the monitor.