Record Setup - Amcrest WLD895 Manual Del Usuario

3
.2

Record Setup

The record menu contains 4 sub-menus.
3
.2. Motion Detection Sensitivity:
1
In this submenu you can repeatedly tap the camera to change
the motion detection sensitivity for each camera. You have the
choice of low, medium and high.
3
.2.
Record mode: Tap the screen to select the time sections and
2
set up the recording type. The system offers 3 types
Manual
By default, motion detection is enabled for each camera.
Note :
, Time Schedule
(1) Tap a camera that you would like to configure.
(2) Tap on the icon to change the event type.
(3) Tap the icon
displaying 12:00pm to 23:00pm.
Motion recording: System only records when motion is
detected by the camera and will stop recording after 30
seconds from when the last motion was detected.
Motion Schedule Manual
00 01 02 03
:00 :00 :00
Sun
Mon
Tu e
Wed
Thu
F r i
Sat
and Motion detection
to go to the second page
Record
Record
04 05 06 07 08 09
:00 :00 :00 :00 :00 :00
10 11
:00 :00 :00
recording:
of
.
11