Gewiss Chorus GW 10 752 Manual Del Usuario página 23

PROGR MMING WITH THE E SY B SE UNIT
After creating the desired function, it is possible to configure the device function para-
meters from the Application ¡ Parameters menu.
The parameters available, in relation to the function created, are listed in the following
table.
The underlined value is the default value.
Function: edges
Parameter: Edge function
on/off
off/on
on
off
Function: scene
Parameter: scene number
1 activation of scene1 (prolonged closure: memorising of the scene)
2 activation of scene 2 (prolonged closure: memorising of the scene)
3 activation of scene 3 (prolonged closure: memorising of the scene)
4 activation of scene 4 (prolonged closure: memorising of the scene)
5 activation of scene 5 (prolonged closure: memorising of the scene)
6 activation of scene 6 (prolonged closure: memorising of the scene)
7 activation of scene 7 (prolonged closure: memorising of the scene)
8 activation of scene 8 (prolonged closure: memorising of the scene)
Function: dimming
Parameter: pushbutton function
up
down
Function: blinds
Parameter: pushbutton function
up
down
Configuration parameters (Easy)
ON when closed, OFF when open
OFF when closed, ON when open
on
off
Increases light intensity, ON
decreases light intensity, OFF
raising of blinds, regulation of laths
lowering of blinds, regulation of laths
23
E
N
G
L
I
S
H