Epson SR-610 Manual Del Usuario página 10

English
Specifications
SR-610
Item
CPU CPU
Socket
Secondary cache
memory
Memory Main memory
BIOS ROM
Chip set
Video controller
Sub storage HDD
Interface Ethernet (*1)
Shared board for
keyboard/mouse
Serial (*2)
Parallel
Display (*3)
USB (*4)
Customer display
Drawer (DK)
Expansion slot PCI slot (*5)
Sound Beep
Speaker
BIOS
Supported OS
RTC/CMOS backup battery
x
® ®
Intel Celeron M 1.3 GHz
mPGA479M socket
512 KB (Built in the CPU.)
184 pin DDR SDRAM DIMM slot × 2, Max. 1 GB
(Supports up to DDR DIMM PC2700.)
Note: Operates as PC2700 when using a DIMM of PC2700
or faster.
8 MBit
Intel 855GME/ICH4 chip set
Built-in chip set (Supports dual display.)
12.1" LCD, 800 × 600 dots
256K colors (16770K colors can be set.)
Serial ATA interface with 1 or 2 built in-type 2.5" HDD.
RAID-ready for 2 built-in-type (mirroring only)
10 BASE-T / 100 BASE-TX is included as standard.
Wake On LAN available
× 2 PS/2-compliant (6-pin mini-DIN)
Either the front connector or the bottom connector is
available.
Can be switched with the DIP switch.
Both keyboard and mouse can be connected using
branch cable.
× 3 (D-sub male 9-pin)
Can be set in the BIOS settings so that it outputs DC5 V to
pin 1 through COM1 and COM2.
COM3 can be set in the BIOS settings to be used as
Normal, TM/DM-D, DRW, DM-D port. (*6)
Supports Wake up function (Modem Ring On) of pin 9 (RI).
× 1 (D-sub female 25-pin) Supports EPP/ECP.
× 1 (D-sub female 15-pin)
External: USB 2.0 × 4 (high/full/low speed support)
Internal: × 1 (For optional CompactFlash Board)
× 1 (RJ-45)
× 1
× 1 (DC 3.3 V power supply is provided.) (Revision 2.2)
Can be output to built-in speaker.
Built-in monaural speaker (with hardware volume
control)
Supports ACPI 2.0/APM 1.2/Plug & Play/DMI.

Windows 2000 Professional SP4 or later
Windows XP Professional SP2 or later
A lithium non-rechargeable battery supplies the backup
voltage to the RTC.
Specification