Switch Cover; Dip Switch; Maintenance / Cleaning - Epson SR-610 Manual Del Usuario

English
Attaching Peripheral Devices
To attach a peripheral device, connect the device to the connector at the bottom of
the SR-610 and clamp the cables of the device with the cable clamp.
1. Open the cable clamp. See Illustration R.
2. Set the cables inside the cable clamp.
3. Close the cable clamp. See Illustration S.
Keyboard/Mouse
The SR-610 has 2 connectors for the keyboard and mouse; one is inside the front
switch cover, and another is at the bottom of the front switch cover. However,
only one of them can be used at a time.
Use the DIP switch at the bottom of the SR-610 to switch the connectors.

DIP switch - 5

OFF
ON
Maintenance
Cleaning
CAUTION:
Never clean the product with alcohol, benzine, thinner, or other such solvents.
Doing so may damage or break the parts made of plastic and rubber.
Display
Wipe away the dirt with a cloth that is dry or slightly moistened with ethanol or
isopropyl alcohol.
Keyboard
Remove dust with a vacuum cleaner.
SR-610
Remove dust around the openings with a vacuum cleaner.
10 SR-610 User's Manual
Connector location
Front
Bottom