Symbols; Description Of The Appliance And Its Accessories; Preparation; Use - Imetec L4602 Instrucciones Para El Uso

• For the features of the appliance, refer to the external packaging.
• Use the appliance only with the supplied accessories that are an essential
part of the appliance.
EN

DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES

refer to Figure [A] in the Illustrative Guide to check the contents of the package.
1. Air outlet grid.
2. Technical data.
3. Support feet
• Unpack the product.
• Check that it is intact and not damaged.
• Fit the two support feet (3) using the screws contained in the package, fix them carefully
in the correct position as shown in the illustrative guide [A].
• Connect the product to the domestic mains.
ATTENTION! This appliance must not be used if it has been
dropped or if there are visible signs of damage.
• rotate the power switch (6) to ECO for Eco heating.(1200 W)
• rotate the power switch (6) to the MEDIUM position for medium heating (1200W with forced
ventilation).
• rotate the power switch (6) to rAPID for rapid heating. (2000 W)
• rotate the power switch (6) to the ULTrA rAPID position for ultra rapid heating (2000W with
forced ventilation)
10

SYMBOLS

Warning
Do not cover
Max temperature
Hot air with Eco
function
Very hot air

PREPARATION

4. Power cable
5. Ambient thermostat.
6. Power switch.

USE

Prohibited
Min temperature
Appliance OFF
Hot air with forced
ventilation
Very hot air with forced
ventilation