Eagle Group Snap-n-Slide 357473 Instrucciones De Montaje

PART #357473
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE.
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
Step 1 - Mount brackets in relation to studs behind wall.
stud behind
wall
wall
bracket
wall
Step 2 -
Slide the wall shelf into desired placement.
In order for proper bonding of the tape adhesive, ensure the bottom of
the shelf is free of dirt, oil and other contaminants prior to installation.
Step 4 - Lower shelf and press firmly over brackets to lock into place.
A secure means of fastening the wall brackets prior to mounting shelf must be utilized.
Eagle Group will not be held responsible for wall brackets pulling away from the wall.
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
Snap-n-Slide
ASSEMBLY INSTRUCTIONS
SAVE YOUR BOX AND ALL PACKING MATERIALS.
left-hand
wall bracket*
• 100 Industrial Boulevard, Clayton, Delaware 19938-9905 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065
® Wall Shelves
CAUTION
wall
right-hand
wall brackets*
* Quantity of wall brackets varies with length of shelf.
Step 3 -
Hold shelf in place and peel off tape backing.
shelf
CAUTION:
CAUTION:
Wall brackets must be
fastened securely prior to
mounting shelf.
Group cannot be held
responsible for the failure to
use the appropriate secure
mounting method.
wall
tape
backing
wall
bracket
tab on
bracket
upturn
on wall
shelf
EG10044 Revised 01/08
Eagle
(End)