Eagle Group 336889 Instrucciones Para El Ensamblaje

PART #336889
Before you begin:
Remove preinstalled screws
from leg channel assemblies
and discard.
Note: For mounting onto
tables with marine edge,
kit #607297 is required.
Step 1 - Install polymer slides
Using #334927 screws, mount
polymer slides into predrilled holes
in leg channels.
leg
channel
polymer
slide (left)
screw
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2009 by the Eagle Group
Drawer with Polymer Slides
ASSEMBLY INSTRUCTIONS
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH
DELIVERING CARRIER FOR ANY DAMAGE
SAVE YOUR BOX AND ALL PACKING MATERIALS.
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT
IF RETURNED IMPROPERLY PACKED.
#1
#2
#3
#4
#5
Step 2 - Install drawer stop
Center drawer stop on front leg channel.
Using #300794 screws, mount drawer
stop onto leg channel.
NOTE: Holes for mounting drawer stop
are NOT predrilled.
leg
channel
screws
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065
CAUTION
# qty part #
#1 2 334948
338456
338476
#2 4 334927
#3 1 333076
#4 2 300794
#5 1 **
* These tables feature custom centerlines of 30˝.
** Part number varies per order.
drawer stop
polymer
slide (right)
.
Parts List
description
poly slides for 24˝-wide table, or
poly slides for 30˝/36˝-wide table, or
poly slides for 36˝-wide table*
1˝ screws
drawer stop
#8 x 1/2 drill screws
drawer bowl
tabletop
(underneath)
leg channel
assemblies
Step 3 - Install drawer bowl
tabletop
polymer
slide (left)
drawer bowl
EG10040
polymer
slide
(right)
(End)
Revised 03/09