Machine Elements; Explanation Of Symbols - LORCH MicorStick 160 BasicPlus Manual De Instrucciones

1

Machine elements

Carrying belt
1
Control panel
2
Negative terminal socket
3
Positive terminal socket
4
Air intake
5
Mains cable
6
Power cable/battery cable with device coupling
7
(optional)
2

Explanation of symbols

2.1 Meaning of the symbols in the
operation manual
Danger to life and limb!
If the danger warnings are disregarded, this
can cause slight or severe injuries or even
death.
Danger of property damage!
Disregarding danger warnings can cause
damage to workpieces, tools, and equip-
ment.
General note!
i
Indicates useful information about the prod-
uct and equipment.
3 General regulation of use
This machine is intended for use in the commercial and
industrial sector. It is portable and suitable for operation
using the mains supply, a power generator or for opera-
tion with a battery (optional).
The machine is intended for electrode welding.
Together with a TIG welding torch, the machine can be
used for TIG welding with direct current of
– unalloyed steels, low and high-alloy steels,
– copper and its alloys,
– nickel and its alloys,
– special metals like titanium, zirconium, tantalum.
The device is not intended for TIG welding of alumini-
um and magnesium with alternating current.
- 20 -
I
2.2
909.2759.9-00
General regulation of use
Danger of death through electrocution!
See chapter "12.3 Connecting the power
supply" on Page 23.
Some of the options and accessories shown
i
or described may not be a part of the scope
of delivery.
Subject to change.
Meaning of the symbols on the
machine
Danger!
Read the user information in the operation
manual.
Disconnect the mains plug!
Pull out the mains plug before opening the
housing.
02.16