IO Mabe IOMN3FFH Instructivo Y Advertencias página 48

PLUG IN THE REFRIGERATOR
Before plugging in the refrigerator, make sure the ice
maker power switch is set to the O (off) position.
See the grounding information attached to the power
cord.
Note: The image can be different from your product.
PUT THE REFRIGERATOR IN PLACE
Move the refrigerator to its final location.
LEVEL THE REFRIGERATOR
The refrigerator can be leveled by adjusting the rollers
located near the bottom hinges.
Rollers have three purposes:
• Rollers adjust so the door closes easily when opened
about halfway. (Raise the front about 5/8" [16 mm]
from the floor.)
• Rollers adjust so the refrigerator firmly positioned on
the floor and does not wobble.
• Rollers allow you to move the refrigerator away
from the wall for cleaning.
To adjust the rollers:
• Turn the roller adjusting screws clockwise to raise
the refrigerator, counterclockwise to lower it. Use a
3/8" hex socket or wrench, or an adjustable wrench.
LEVEL THE DOORS
Adjust the refrigerator door to make the doors even at
the top.
To align:
• Using a 7/16" wrench, turn the door adjusting screw
to the right to raise the door, to the left to lower it.
Note: A nylon plug, imbedded in the threads of the pin,
prevents the pin from turning unless a wrench is used.
• After one or two turns of the wrench, open and close
the refrigerator door and check the alignment at the
top of the doors.
48