Pre-Operation Check - Honda WJR4025 Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

For safe and efficient spraying, always make a pre-operation inspection before
operating:
Before performing a pre-operation inspection, place the backpack sprayer
on a level surface, stop the engine and make sure that the engine switch is
in the OFF position to be certain the engine will not start accidentally.
Before each use, look around and underneath the engine for signs of oil or
gasoline leaks.
1. Check the engine oil level.
Every 10 hours, check the engine oil level and replenish oil up to the upper limit
if the engine is operated for long time continuously.
CAUTION:
Engine oil is a major factor affecting engine performance and service life.
Nondetergent or vegetable oils are not recommended.
Check the engine oil level with the engine stopped and in a level position.
a. Remove the oil filler cap.
b. Check the oil level. If it is below the upper limit, fill with the recommended
oil (see page 28) to the upper limit.
c. Reinstall the oil filler cap securely.
Add the engine oil slowly to avoid overflowing, as the engine oil tank capacity is
small.

6. PRE-OPERATION CHECK

27

Hide quick links:

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido