After Operation - Honda WJR4025 Manual Del Propietário

After operation

When handling agricultural chemicals, follow the directions of the manufacturer
or distributor. Also, follow the laws and regulations.
1. Stop the engine (see page 42).
2. After the engine cooled, remove the drain
cap to drain the agricultural chemicals from
the chemical tank.
3. Install the drain cap and remove the chemical
tank cap to pour clean water into the tank to
rinse its inside.
4. Start the engine again (see page 37) and
move the throttle lever between the FAST
position and the SLOW position (see
page 46).
Move the shut-off valve a few times. Spray a
few minutes. Remove the drain cap again to
drain the water from the tank.
5. Set the nozzle pipe and sprayer hose into the nozzle holder, and secure them
by the holder band (see page 22).
48