Changing The Securityc; To The Handset - GE 25860 Guia Del Usuario

Changing the Security Code
The default security code for accessing the answering system from another
location is 1 2 3.You must use the handset to change the security code.
With the phone OFF (not inTALK mode), follow these steps:
1. Press the transfer/answerer button to display ANSWERER REMOTE.
2. Press the *exit button.
3. Enter the new 3-digit security code.
4. Press the *exit button again.The handset announces the new code,
pauses, beeps, and then announces the menu options again.
Belt Clip and Optional Headset
Attaching the Belt Clip
1. Insert the sides of the belt clip into the slots
on each side of the handset.
2. Snap the belt clip into place.
Connecting an Optional Headset

to the Handset

The handset can be used with an optional headset for hands free operation.
1. Connect the headset to the headset jack
on the side of the handsetThe handset
receiver and microphone are disabled
when the headset is connected.
2. Adjust the headset to rest comfortably on
top of your head and over your ear. Move
the microphone to approximately two to
three inches from your mouth.
3. Press the talk/callback button to answer a
call or make calls using
the headset.
4. To return to normal operation, unplug the headset from the jack.
26
Slot for
belt clip
Headset jack
Headset plug
talk
call back
-
- +
mute
memory
2
abc
5
jkl
8
tuv
0
oper
Slot for
belt clip