Roubleshooting Tips; Cordless Phones - GE 25860 Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Answering System Display Messages
The following messages show the status of the answering system or help
you set up and use the system.
0-59
CL (blinking)
- -
An (blinking)
F (blinking)
Six bars (blinking)
LA (Line Access)
Troubleshooting Tips
Cordless Phone Solutions
No dial tone
• Check or repeat installation steps:
Make sure the base power cord is connected to a working electrical outlet.
Make sure the telephone line cord is connected to the base and the
wall jack.
• Connect another phone to the same wall jack; if it doesn't work, the
problem might be your wiring or local service.
• The handset may be out of range of the base. Move closer to the base.
• Make sure the battery is properly charged (16 hours).
• Make sure the battery pack (in the handset) is properly installed.
• The handset should beep when you press the talk/callback button, and
the charge/in use indicator on the base should be lit when the handset
rests in the cradle. If not, the battery may need to be charged.
• Place the handset in the base for at least 20 seconds to reset the unit.
30
Indicates the total number of messages.
The voice time/day stamp needs to be set.
Answering system is turned off.
The system is answering a call.
Answering system memory is full.
The system is recording a memo or
an announcement.
External line remote answering system.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido