ITT Controls MTS Manual De Instrucciones página 16

Annex 2: Recommended installation / Installation recommandée / Empfohlene Installation /
Installazione raccomandata / Instalaciones recomendadas / Installatie voorschrif
1.) Visual inspection at reception
3.) Tension free installation
5.) Strainer with a mesh of 100 µm
recommended
7.) No installation at a low point in the
network
2.) No welding with installed meter
4.) 6 DN straight inlet / 4 DN outlet pipe
6.) No pressure pulses and excessive
flow rate
8.) Recommended installation with inlet,
outlet and drain valves
inlet valve
Vanne ammont
Einlassventil
Strainer
Tamis
Sieb
Outlet valve
Vanne aval
Auslassventil
Drain
Purge
Ableitung
17