Replacement Parts - Marshalltown ENFORCER E400 Instructivo

Maintenance
Regularly inspect your ENFORCER™ to
ensure all major components are free of
damage and are in good working condition.
Replace all worn or damaged components
with the appropriate repair part as indicated
on page 19.
Re-lubricate the piston seals and cap o-rings
after cleaning. Failure to do this will result in
poor product performance and possibly com-
ponent failure.
After cleaning and re-lubrication, cycle the
piston up and down while twisting the piston
by hand within the tank to ensure a good
seal between the piston seals and tank walls.
Cycling this piston will also ensure the best
piston function by lubricating the inside walls
of the tank. If the piston does not move eas-
ily and freely within the tank, the gun trigger
may be closed or the piston seals are sand-
wiched between the piston body and tank
wall

Replacement Parts

Replacement parts found on p.19
7