Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
*1: The accuracy of the readout is guaranteed from 20% to 100% of maximum range ±1
increment. The torque accuracy is a typical value.
Calibration point is on the rubber grip. For keeping the accuracy, calibrate the screwdriver for a
constant period time (1 year).
*2: Use a special designed cable (accessory) to upload record data to PC.
*3: Use one AAA batteries (Test condition: Toshiba carbon-zinc battery).
*4: Horizontal and vertical test.
*5: One cycle means twist the screwdriver from 0 cN-m to maximum range and back to 0 cN-m.
*6: Environmental test:
a. Dry heat
b. Cold
c. Damp heat
d. Change of temperature
e. Impact (shock)
f. Vibration
g. Drop
*7: Electromagnetic compatibility test:
a. Electrostatic discharge immunity (ESD)
b. Radiated susceptibility
c. Radiated emission
• Remove the battery cap.
• Insert one AAA batteries matching the -/+ polarities of the battery to the battery compartment.
• Put on the battery cap and fasten it tightly according to the following figures.
• Press
to power on the digital screwdriver.
• Usually press
ATTENTION:
If an external force is applied to the screwdriver during power-on period, an initial torque offset
will be recorded in the memory.
18
BEFORE USING THE SCREWDRIVER
BATTERY INSTALLATION
POWER ON AND RESETTING THE SCREWDRIVER
to reset the digital screwdriver before using it.
Publicidad
Tabla de contenido
