Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Note:
1. The "Peak Hold" mode recorded value review also can be operated form "Track" mode
operation.
2. If you operate in the "Peak Hold" mode, the display will show
next step.
3. If the record is empty, it will show
4. This function is not supported on all type of models.
5. Communication mode is for uploading record data to PC.
6. Communication mode is also for calibration of screwdriver. Please contact your local dealer for
information.
Precaution:
1. Communication function is only supported on some models. Check the model no. and its
specification before using communication function.
2. Do not insert the plug of communication cable into torque screwdriver that does not support
communication function.
Turn off power and then connect the accessory cable between the COM port of PC and
screwdriver.
• Make sure the connection between PC and screwdriver is normal.
• Change the screwdriver operation mode to
Value Review" section).
• Use PC to start the uploader program.
• In uploader program, first select the correct COM port No.
• Next, select the file path to save the uploaded data.
COMMUNICATION
CONNECTING COMMUNICATION CABLE
UPLOADING RECORD DATA
.
. (Please refer to "Peak Hold Mode Recorded
and please go to
27
Publicidad
Tabla de contenido
