Maintenance And Storage; Battery Maintenance - Ega Master 66578 Manual De Instrucciones

• Finally, press "upload" button to transmit the screwdriver records to PC.
• The uploaded data is then shown on the column and saved in the *.csv file. Use Microsoft Excel
to view *.csv file.
CAUTION:
Refer to the uploader program user guide for the detail operations.
ATTENTION:
One-year periodic recalibration is necessary to maintain accuracy.
Please contact your local dealer for calibrations.
CAUTION:
1. Over-torque (110% of Max. torque range) could cause breakage or lose accuracy.
2. Do not shake violently or drop screwdriver.
3. Do not use this screwdriver as a hammer.
4. Do not leave this screwdriver in any place exposed to excessive heat, humidity, or direct sunlight.
5. Do not use this apparatus in water.(not waterproof)
6. If the screwdriver gets wet, wipe it with a dry towel as soon as possible. The salt in seawater
can be especially damaging.
7. Do not use organic solvents, such as alcohol or paint thinner when cleaning the screwdriver.
8. Keep this screwdriver away from magnets.
9. Do not expose this screwdriver to dust or sand as this could cause serious damage.
10. Do not apply excessive force to the LCD panel.
11. Apply torque slowly and graspe the center of the handle. Do not apply load to the end of handle.
1. When the screwdriver is not used for an extended period of time, remove the battery.
2. Keep a spare battery on hand when going on a long trip or to cold areas.
3. Sweat, oil and water can prevent a battery's terminal from making electrical contact. To
avoid this, wipe both terminals before loading a battery.
4. Dispose of batteries in a designated disposal area. Do not throw batteries into a fire.
According to Waste Electrical and Electronic Equipment directive (WEEE), these ones
must be collected and arranged separately. If you have to throw them out, please, do not
use the usual rubbish. Please, contact your distributor for free recycling.
28

MAINTENANCE AND STORAGE

BATTERY MAINTENANCE