Installation Instructions; Install Backsplash - Forno FRHWM5029-30HB Manual De Instrucciones

SCREWS PROVIDED
M3.5x30mm self-tapping screws
(18x)
M4x10mm screws with flat
washers(2x)
• Use a level to draw the cooktop centerline location. Draw the line to ceiling height.
• Use a level to draw the cooktop surface location.

INSTALL BACKSPLASH

Remove packaging
Place backsplash against the wall and match the centerline and cooktop surface
Mount the backsplash to the wall through the holes at top and bottom by using M3.5x30mm self-tapping
screws (2x at top,2x at bottom)
NOTE: Make sure screws are installed in vertical studs as much as possible
Install mounting bracket onto the wall

INSTALLATION INSTRUCTIONS

M4x12mm self-tapping screws (2x)
M4x8mm self-tapping screws(10x)
Centerline
Cooktop surface