External Control Device
Setup
To obtain the external control device setup
information, please visit
Troubleshooting
y Cannot control the TV with the remote control.
y
- Check the remote control sensor on the
product and try again.
- Check if there is any obstacle between the
product and the remote control.
- Check if the batteries are still working and
properly installed (
y No image display and no sound is produced.
y
- Check if the product is turned on.
- Check if the power cord is connected to a wall
outlet.
- Check if there is a problem in the wall outlet by
connecting other products.
y The TV turns off suddenly.
y
- Check the power control settings. The power
supply may be interrupted.
- Check if the Sleep Timer/Off Time is activated
in the Time settings.
- If there is no signal while the TV is on, the TV
will turn off automatically after 15 minutes of
inactivity.
Specifications
Product specifications may be changed without
prior notice due to upgrade of product functions.
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV
1-135
12
www.lg.com
.
to
,
to
)
External Antenna Impedance
75 Ω
Environment Condition
Operating Temperature 0 to 40 °C (32 °F to 104 °F)
Operating Humidity Less than 80 %
Storage Temperature -20 to 60 °C (-4 °F to 140 °F)
Storage Humidity Less than 85 %
Wireless Module
Wireless Module (WN8122E1) Specification
Standard
IEEE802.11a/b/g/n
2400 to 2483.5 MHz
Frequency Range
5150 to 5250 MHz
5725 to 5850 MHz
802.11a : 16.5 dBm
802.11b : 16 dBm
Output Power
802.11g : 15.5 dBm
(Max.)
802.11n - 2.4 GHz : 15.5 dBm
802.11n - 5 GHz: 16.5 dBm
y Contains FCC ID: BEJWN8122E1
Contains IC: 2703H-WN8122E1
y Because band channel used by the country could
be different, the user can not change or adjust the
operating frequency and this product is set for the
regional frequency table.
y This device should be installed and operated with
minimum distance 20 cm (7.8 inches) between
the device and your body. And this phrase is for
the general statement for consideration of user
environment.