Mounting On A Table - LG 32LF580B Manual Del Usuario

Basic functions
When the TV is turned off, place
your finger on the joystick button,
press it once and release it.
Power On
When the TV is turned on, place
your finger on the joystick button,
press it once for a few seconds, and
release it. (However, if the Menu
button is on the screen, pressing
and holding the joystick button will
Power Off
let you exit the Menu.)
Place your finger on the joystick
button and move it left or right to
adjust the volume level.
Volume Control
Place your finger on the joystick
button and move it up or down to
adjust the channel.
Channels
Control
NOTE
y Move the joystick button up, down, left, or right.
y
Be careful not to press it. If you press it first, you
may not be able to adjust the volume or scroll
through the channels.
Adjusting the Menu
When the TV is turned on, press the joystick button
one time. You can adjust the menu items moving the
joystick button up, down, left, or right.
Turns the power off.
Accesses the main menu. (Depending upon
model)
Clears on-screen displays and returns to TV
viewing.
Changes the input source.

Mounting on a Table

(Image shown may differ from your TV.)
1 Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (4 inches) (minimum) space from
the wall for proper ventilation.
8
1 0 c m
2 Connect the power cord to a wall outlet.
CAUTION
y Do not place the TV near or on sources of heat,
y
as this may result in fire or other damage.
Using the Kensington Security
System (optional)
(Depending upon model)
The Kensington security system connector is located
at the rear of the TV. For more information of
installation and using, refer to the manual provided
with the Kensington security system or visit
www.kensington.com.
Connect the Kensington
security system cable between the TV and a table.
NOTE
y The Kensington security system is optional. You can
y
obtain additional accessories from your local dealer.
Securing the TV to a Wall (optional)
(Depending upon model)
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall. Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
10 cm
1 0 c m
m
1 0 c
http://