Output Dsp Channel - FONESTAR PDA-1408 Manual De Instrucciones

EN
MATRIX
With the MATRIX function, you assign the inputs to the outputs. Clicking on the grey rectangles turns them
green, indicating the correct assignment of the input channel to the desired output.
IN/OUT 1~4: corresponds to the analog audio inputs/outputs available on the rear panel.
IN/OUT NET 1~8: corresponds to the broadcast inputs/outputs.

OUTPUT DSP CHANNEL

Same menu as Input DSP Channel but without the expander module.
SAVE/LOAD
From the SAVE/LOAD tab you can save/load settings as presets. This data can be stored in the internal
memory of the processor as well as in the PC. The PDA-1408 loudspeaker processor memory holds a total
of 24 presets.
- 10 -