NGS WILDDANCE Manual Del Usuario página 4

USER'S MANUAL
1 Power on / Standby
2 Mute
3 Repeat key (single repeat, repeat all)
4 Mode key (choose from AUX / USB / SD / Bluetooth / FM
modes)
5 0-9 keys
6 Sound mode key (choose from EQ1, EQ2, EQ3, EQ4, EQ5)
7 Record key (press to start and again to stop recording)
8 Play/pause (the sound will be
muted when paused)
9 Volume –
10 Volume +
11 Previous song
12 Next song
4
1 2
3 4
5 7 6
5
8 11
9 10
12
AUX IN, USB/SD, BLUETOOTh,
RADIO
To switch from one mode to another press the MODE button.
If the device is not connected to a USB stick or an SD card,
these modes will be omitted.
1. AUX IN
With the attached audio cable, you can connect the device
with the external multimedia audio sources through the
port "AUX". After connection, just set the mode to AUX by
pressing the MODE button on the device. At this time, the
LINE indicator will be displayed on the screen, suggesting the
device can play the audio files from multimedia sources like
PC, mobile phone, MP3 and MP4, etc.
Note: In AUX IN mode, the forward and rewind song functions
will not operate. They must be accessed through the auxiliary
device directly.