Install Controller / Timer; Install Solar Sensor - Broan NuTone haven HVDCT Instrucciones Para El Montaje Y Cableado

Install Controller / Timer

Fasten controller timer to secure mounting surface with (2) 1-inch long
1 ]
screws provided in parts bag.
Secure cables to the same surface to prevent them from being pulled
2 ]
and disconnected. Cable clamps may be purchased separately. Do not
staple cables.
Install Solar Sensor (optional)
Install solar sensor if you wish to program the system using ambient light/dark,
rather than time of day.
NOTE: Make sure the solar sensor is located away from bushes,
obstructions, or artificial light source. Artificial lighting and other
obstructions will prevent sensor from operating properly.
Fasten solar sensor mounting bracket to secure mounting surface with
1 ]
1-inch long screw provided in parts bag.
Secure cables to the same surface to prevent them from being pulled and
2 ]
disconnected. Cable clamps may be purchased separately. Do not staple
cables.
6