Broan NuTone haven HVDCT Instrucciones Para El Montaje Y Cableado página 8

3 ] Set Repellent to turn on at dark via Solar Sensor, stay on for 1-12
hours (cancels out Light clock settings)
• Press MODE until,
Solar Sensor indicators glow; use + or - to adjust number of hours
(1-12) for repellent to remain on after dusk.
• Depressing and holding down the + or- button will cause time to
scroll forward or backward. Release button to stop the scrolling.
• Press MODE, until
"Repellent via Sensor"
4 ] Set Light "On" and "Off" time via clock
• Press MODE until,
indicators glow; use + or - to adjust hours for light on, noting AM
and PM indicators
• Press MODE, Clock and Light indicators glow; use + or - to adjust
minutes for light on
• Press MODE until
Repellent indicators glow; use + or - to adjust hours for light off
• Press MODE, Clock and Light indicators glow; use + or - to adjust
minutes for light off
• Depressing and holding down the + or- button will cause time to
scroll forward or backward. Release button to stop the scrolling.
• Press MODE until
Light Time"
5 ] Set Light to turn on at dark via Solar Sensor, stay on for 1-12
hours (cancels out Light clock settings)
• Press MODE until,
Sensor indicators glow; use + or- to adjust number of hours (1-12)
for light to remain on after dusk
• Depressing and holding down the + or- button will cause time to
scroll forward or backwards. Release button to stop the scrolling.
• Press MODE, until
"Light via Sensor"
6 ] Close timer controller cover after programming has been
completed.
appears for 3 seconds, Repellent and
appears or wait 3 seconds to close
appears for 3 seconds, Clock and Light
appears for 3 seconds, Clock and
appears or wait 3 seconds to close "Set
appears for 3 seconds, Light and Solar
appears or wait 3 seconds to close
8