nedis LOCKBLGB10BU Manual De Usuario página 11

become dirty.
•
Use only the battery in the application for which it was intended
as described in this manual.
•
Do not use the battery if any part is damaged or defective.
Replace a damaged or defective battery immediately.
• Do not dismantle, open or shred batteries.
•
When possible, remove the battery from the equipment when
not in use.
•
Do not expose batteries to heat or fire. Avoid storage in direct
sunlight.
• Do not repair the product. If damaged, it must be properly
disposed of.
Installing the battery [Image B - E]
1. Unscrew the lid.
2. Remove the lid.
3. Pull the battery out of the bicycle lock.
4. Disconnect the plugs of the bicycle lock and the battery.
5. Connect the plug of the bicycle lock to the new battery.
6. Push the new battery in the bicycle lock. Place the electrical
wiring in the middle of the lock. Otherwise the cover might
pinch the wiring.
7. Put back the lid.
8. Fasten the lid with the screw.
CKBLGB10BU_MAN_COMP_v05.indd 11
11
6-8-2019 09:55:3