UPPAbaby Maxi-Cosi Guia De Inicio Rapido página 2

WARNINGS + GENERAL SAFETY INFORMATION
WARNINGS
FAILURE TO FOLLOW THESE WARNINGS AND INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR DEATH. CONSULT
ALL INSTRUCTIONS BEFORE USE.
NEVER
place child in car seat before you have attached the seat to the stroller frame.
NEVER
remove infant car seat from stroller frame with child in seat.
• Weight limitations: recommended only for infants within the height and weight
limits of infant car seat models specified in this manual.
• Always use infant car seat restraint system as recommended by manufacturer.
• Intended for use with UPPAbaby CRUZ/ALTA stroller only.
LIMITED WARRANTY
Your UPPAbaby item is warranted to be free from any manufacturing defects for a period of 2 years
from the date of purchase under normal use and in compliance with the operating instructions.
This warranty cannot be extended and an extended warranty cannot be purchased.
This warranty is not transferable and extends only to the original retail purchaser and is only valid
when supplied with proof of purchase. Please retain proof of purchase for this limited warranty.
The warranty is valid only in the original country of purchase. This warranty is subject to the conditions
set forth by country in which the items were purchased. Conditions may vary. UPPAbaby will not ship
replacement or repair parts out of the country of purchase.
UPPAbaby will provide replacement parts or conduct repairs as determined fitting by the company.
UPPAbaby reserves the right to exchange item with a replacement part. Some parts may be replaced
with newer model parts as the item is improved over time.
Please note that a repair issue will NOT be covered by this warranty if:
• The issue is caused by misuse or poor maintenance. Please refer to this instruction booklet for
guidance on stroller use and maintenance.
• Damage is caused by improper installation of UPPAbaby parts and/or accessories. Please refer to
this instruction booklet for guidance on stroller assembly and use.
• Damage is corrosion caused by lack of maintenance or service.
• Damage is due to general wear and tear, which is the result of everyday use or negligence.
• Damage is caused by sun intensity, sweat, detergents, damp storage or frequent washings.
• Repairs or modifications are carried out by a third party.
• Item is purchased from an unauthorized retailer. Approved retailers are listed on our website
at www.uppababy.com.
• Item is second-hand.
• Item is damaged as a result of an accident, airline or freight damage.
UPPAbaby reserves the right to determine if warranty terms and conditions have been met.
Please contact your local distributor if you have any questions regarding warranty.
Please register your product at www.uppababy.com
FITTING ADAPTERS TO STROLLER FRAME
Prior to fitting adapter to stroller frame, engage brake on stroller and remove
seat from frame.
TO ATTACH: Place adapters (logo
facing out) onto seat attachments
and press until you hear a click.
NOTE: There are 2 adapters, one for the left and one for the right side of
the stroller. The adapters are marked with "L" and "R" respectively. (The left
adapter and left side of the stroller are determined by the driver's left.)
FITTING MAXI-COSI SEAT TO ADAPTERS
TO ATTACH:
STEP 1: With infant car seat facing
stroller handle, position above frame
aligning base of car seat handle with
adapters.
STEP 2: Push car seat onto adapter
posts.
STEP 3: Make sure side lock tabs are
engaged. Lift up on car seat handle to
check attachment.
TO REMOVE: Squeeze together
prongs to release from stroller frame.
TO REMOVE:
Simultaneously push release triggers
found on car seat located by inside
of carry handle.
Compatible with the following
Maxi-Cosi ® infant car seats:
Citi ® , Cabrio ® , CabrioFix ® ,
Mico and Pebble .
® ®