Drying; Storage - INQUA 1000 Instrucciones De Uso

Drying


After disinfection, place the INQUA
dry, clean and absorbent surface.
You can remove excess water more quickly by shaking all parts.

Let them dry completely.
The components should not be dried in damp rooms (e.g., the
bathroom).

Storage

WARNING: Bacterial contamination caused by residual
moisture
Inadequate drying can present a risk to health, e.g. by causing
an infection.
Make sure that all components are free of residual moisture
before reassembling them and/or packing them away or using
them for inhalation again. All components must be perfectly
dry.

Check all product components. Replace any broken, misshapen
or discoloured parts.

Between uses, and in particular during long breaks in treatment,
wrap the dry nebuliser in a dry, clean, lint-free cloth (e.g. a tea-
towel) and keep it in a dry, dust-free environment.
WARNING: Danger to health from choking or misuse
If children operate the inhalation device without supervision,
there is a risk that they may swallow small parts, which may
block the respiratory tract, or that incorrect use may cause
injury (e.g. strangulation with the connection tubing or power
cord).
Keep the INQUA
52
®
®
nebuliser out of children's reach.
nebuliser components on a