Troubleshooting - Southwire Woods L6009 Instrucciones De Instalación

Troubleshooting

Symptoms
Lights are not coming
on at all
Motion sensor triggers
with motion but stays on
Motion sensor comes on
randomly, or blinks in
test mode
Not enough or too much
detection range
Possible Cause
1.No power connection
2.Wrong wiring
3.Faulty bulbs
1.Heat is being reflected
from surrounding objects
to the sensor
2. A light bulb is too close to
the Sensor creating heat
3. Installed in moving,
busy area
1.Heat influence
2.Motion sensor aiming
issue
1.Motion sensor
RANGE setting
Solution
1. Make sure both the circuit
breaker and wall switch are in the
ON position
2. Check the wiring to make sure
all the connections
are correct and secure
3.Make sure the bulbs are not
damaged and have good connec-
tion with the bulb socket
1. Reposition the motion sensor
2. Adjust the light bulb position
away from Motion Sensor
3. Move the Motion Sensor away
from busy areas such as sidewalks,
or passing cars
1. Reposition the bulbs away from
Motion Sensor
2. Do not aim at heating/cooling
ducts, pools of water, windows, or
smooth walls
1. Adjust the Motion Sensor's
sensitivity to desired RANGE level