Liberty Pumps 331 Guia De Inicio Rapido

3
Before use, prime pump
Use approx. 2 cups water
4
1
□ Do not run pump dry
□ Do not block air vents
□ Do not overtighten prime plug (
□ Suction hose must not be longer than 15 feet
□ Line could take up to 2 minutes to prime
□ Do not submerge motor or allow motor to be exposed to water
□ Ambient temperature must not exceed 104°F (40°C)
□ Water temperature must not exceed 140°F (60°C)
□ Not for use with potable water or food products
□ Not for use with flammable liquids
1 Use Teflon tape (4 wraps max) or sealant on
threaded fittings to ensure proper seal
2
Use high-quality hose, such as PEX or washing
machine supply hose, for suction line to prevent
collapsing
3
Prime pump and hand-tighten fill plug
Plug power cord into a properly fused and
4
grounded GFCI electrical outlet
5
Use strainer on intake line if foreign objects may
be sucked into pump
6 When used with materials such as glycol or
3
vinegar, flush with water and drain before
storing to prevent corrosion and/or damage
from freezing
1
hand-tighten only
Copyright © Liberty Pumps, Inc. 2018 All rights reserved.
Model 331 Transfer Pump
Quick Start Guide
6
After use, rinse with water
2
)
1198000B
5