Installing Batteries; Using The Remote Control - Insignia NS-R5101 Guia Del Usuario

Insignia NS-R5101 5.1 Surround Sound A/V Receiver
Item Description
11
SELECT button
12 Input selector buttons "Using your receiver" on page 24.
13 TONE MODE button
14 SOUND PARAMETER
button
15 STEREO button
16 TEST tone button
17
SELECT button
18
SELECT button
19 DISPLAY button
20 DIGITAL INPUTS
button
21 PRESET SCAN button "Tuning to preset stations" on
22 Numeric keypad
23 POWER ON button

Installing batteries

Caution
Do not use Ni-Cd rechargeable batteries in this
remote control.
To install the batteries:
1 Remove the cover.
2 Load two type AAA batteries into the
compartment matching the polarity indicated.
3 Replace the cover.
Note
Remove the batteries if they are not to be used for
a long period of time.
For more information, see...
"Navigating through the setup
menu" on page 17.
"Using your receiver" on page 24.
"Adjusting the sound parameters"
on page 21.
"Listening to radio broadcasts" on
page 27.
"Adjusting each channel level with
test tone" on page 22.
"Navigating through the setup
menu" on page 17.
"Navigating through the setup
menu" on page 17.
"Displaying the receiver status" on
page 30.
"Using your receiver" on page 24.
page 28.
"Using your receiver" on page 24.
www.insignia-products.com

Using the remote control

Use the remote control by pointing it towards the
receiver's remote sensor window. Objects
between the remote control and sensor window
may prevent proper operation.
23' (7m)
Use the remote control within about 23 feet
(7 meters) of the receiver and within 30 degrees
of perpendicular to the front of the receiver.
Caution
• Do not expose the remote control to shock. In
addition, do not expose the remote control to
liquids, and do not place in an area with high
humidity.
• Do not place the remote control under direct
sunlight. The heat may cause deformation of
the remote control.
• The remote control may not work properly if the
remote sensor window of the receiver is under
direct sunlight or strong lighting. In such a
case, change the angle of the lighting or
receiver, or operate the remote control closer to
the remote sensor window.
23