Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
•
With Low battery and overload indication function.
Insert/replace battery
One button cell battery (type CR2032) is
already inserted in your new scale. The
insulating strip must be pulled out of the
battery compartment on the underside of
the unit before the scale can be operated.
Replace the battery if the battery change
symbol "LO" appears in the display or if
nothing appears in the display when the
device is switched on.
1. To do this, turn the entire scale upside
down and reset it securely on a firm,
flat surface.
2. Open
the
beneath the device and insert one cell battery (type CR2032).
3. Please note polarity (positive pole upwards; facing towards the lid).
4. Close the battery compartment again
Notes:
–
Used batteries must not be disposed of as household waste. Do not
incinerate batteries because they might explode at high temperature.
Contact your local authority for information concerning reclamation and
disposal of batteries.
–
When replacing the battery, always use brand new battery of the same type.
–
Your settings will not be erased from the memory when you remove the
battery.
How to determine body fat percentage
Why is important to know the body fat
The human body is made up amongst other things of water, fat and muscle
mass. A fat proportion which is too high or too low may lead to increased
health risks. The personal scales with body analysis functionality provide useful
support in motivating someone to reach or maintain the best possible body
weight by monitoring the proportion of body fat.
How does the scale with body analysis functionality works
The scale, measures using BIA (Bio-electrical Impedance Analysis). When you
step onto the electrodes, extremely weak electrical current is passed into your
body.
The
scale
Instructions for use
battery
compartment
weighs
the
difference
between
English
these
signals.
The
2
Publicidad
Tabla de contenido
