HAEGER Fitness BS-INT.001A Instrucciones De Uso página 5

measurements are used in combination with personal data such as age,
gender, height and weight to calculate the amount of body fat.
Setting and storing Data in memory
The unit can be operated if data has been programmed into one of the
personal data memories.
Note: If you make a mistake before you have finished programming it, repeat
the steps from Select a Personal data Code.
Instructions for use
1. Turn on the power
Press any button to turn on the unit. The unit will confirm
activation; the personal data number last used will be
appeared alternately.
2. Change the unit of weight
Use the Selector Switch on the bottom to select a weight
scale to use: Metric (kg), Pounds (lb), or Stones (ST).
3. Select a personal data code
Firstly Press the SET button, the Personal data Code will
be flashed. Press the UP/DOWN buttons to select a
Personal data code (0-9). Once you reach the Personal
data code you wish to use, press the SET button to
confirm.
4. Select Female ( ) or Male ( )
Use the button UP/DOWN buttons to scroll through
female, male settings, and then press the SET button to
confirm.
5. Specify the height
Use the UP/DOWN buttons to specify Height and then
press the SET button to confirm (range of user height is
between 100cm-220cm).
6. Set age
Use the UP/DOWN buttons to specify age. When you
reach your age, press the SET button to confirm (range of
user age is between 10-80 year).
English
3