Fisher&Paykel Smartload DEGX1 Instructivo De Instalacion Y Guia Del Usuario página 21

Installation
Fitting the Front Feet
Note:
Dryer is usually supplied with feet fitted and protruding the correct distance.
Tilt the dryer back using a hand trolley and making sure the trolley and dryer are secure.
1
Fit a rubber insert to each plastic foot as shown.
2
Screw the feet into the foot retainers on the left hand and right hand sides as shown.
3
Screw both feet in so they protrude ½" (12mm) below the bottom of the wall on the foot retainers.
4
US
CA
21