Wrinkle Free; Selecting The Dryness Level - Fisher&Paykel Smartload DEGX1 Instructivo De Instalacion Y Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using Your Dryer

Wrinkle Free

Minimizes the likelihood of wrinkles forming in clothes if you are not
able to unload the dryer straight away.
WRINKLE FREE rotates the drum periodically after the cycle has
finished, tumbling and blowing cool air through the clothes to ensure
they remain wrinkle free. WRINKLE FREE uses very little power and
will continue for up to 24hrs or until the dryer is turned off. After
completing each tumble SmartLoad™ will give an 'End of Cycle' beep
to remind you that the load is dry and can be removed.
To stop WRINKLE FREE press either POWER or START/PAUSE.
SmartLoad™ will open the drum door and unlock the lid so you can
remove your clothes.
WRINKLE FREE can be selected on any cycle and can be turned ON
or OFF at any time during the cycle. This option is automatically
selected on the Permanent Press cycle.
While WRINKLE FREE is in motion, only the WRINKLE FREE light, the
CYCLE light and the LID LOCKED light will be lit.

6. Selecting the Dryness Level

The desired dryness level can be altered. There are five dryness levels to choose between:
EXTRA DRY
DRY/EXTRA DRY
DRY
DAMP/DRY
DAMP
Refer to page 35 for Dryness Level descriptions.
The dryer defaults to the DRY setting. To change this, press
either the up or down arrow to move to your desired dryness
level. If you choose the DAMP/DRY or DRY/EXTRA DRY setting,
two lights will be displayed.
At the end of the cycle, if the clothes are still damp or are too
dry, next time just adjust the dryness level on the touch pad to
meet your personal preferences.
40

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Smartload dggx1Smartload degx2Smartload dggx2

Tabla de contenido